New Tutorial Release – Eye of the Hurricane, Wire Wrapped Pendant
I’m so very thrilled and blessed to have my wire wrapped version of the Princess Diana/ Princess Kate Engagement Ring featured in the October/November 2016 issue of Step by Step Wire Jewelry Magazine!! AND it made the cover too – woo hoo!! Denise Peck, chief editor for the magazine, also wrote a truly lovely intro for it.
There are a few ‘typos’ in the issue, that will be corrected in the digital version, but sadly it’s too expensive to correct and reprint the newsstand version. One of the most important ‘boo boos’ (aside from spelling my name wrong on the cover) is they listed my Etsy shop, MyWiredImagination.ety.com as having the wire for the project – um…. no! The resources should’ve read: Wire and Tools from RioGrande.com , Crystals and settings from MyWiredImagination.Etsy.com, and crystal beads from EurekaCrystalBeads.com
All in all, I’m really thrilled with how it turned out!! Look for the issue on newsstands starting Sept 15th!
Anybody that knows me even a little, knows how much I adore making rings – Check out this post by Gayle Bird on Craftsy’s Jewelry Making Blog. “Learn How To Make Wire-Wrapped Rings“ has fabulous tips for anyone interested in learning how to make wire-wrapped rings.
thanks for stopping by!
Hope to see you again soon!!
At some point or another, every jewelry maker considers making a gemstone ring. These tutorials will help turn that idea into a reality.
Check out my post on Craftsy’s Jewelry Blog for 8 great tutorials to make gemstone rings.
Some of you may know my Mother passed away in 2005. August 1st was her birthday.
I had been wearing some of her charms just strung on a chain, and thought it time for something better. I played around making the charm holder pendant as a way to cheer myself up a bit. A friend suggested I should show people how to make it, since I wasn’t the only one (to wear charms strung on a chain). So here it is ~ I hope you like it.
7 to 12 in. (17.8 to 30.5cm) 16ga ½ hard round wire. (depending on the size of the pendant you want to make.) 2 or 3 – 6mm(or larger) jump rings.
|Cut and clean a 7 inch (17.8cm) piece of half hard round wire.With your round nose pliers grasp the wire 2 in. (5.1cm) from the end of the wire.|
|Cross the wires over the pliers, and spread them just far enough apart to create a loop.|
|Use your thumb to shape the left lobe of the heart.|
|Continue shaping the wire, until it looks something like this.|
|Hold on to the completed side of the heart, and use your thumb to shape the other lobe of the heart.|
|Slide 2 or 3 jump rings onto the shorter wire. These will act as the ‘bail’ for your pendant.|
|Use chain nose pliers to wrap the short wire around the long wire.|
|This is how your pendant should look at this point.|
|With your thumb, shape the long tail of wire into a curve.|
|With round nose pliers, grasp the wire roughly 1 inch below the wrapped wire, and bring it around the jaw of the pliers to create the bottom loop.|
|Create a hook in the end of the wire. This will be the “latch” for your charm holder.|
|Tada 🙂 Add some hammered texture and some charms and you’re good to go.|
|This is mine, though I think I might need to make a bigger one.|
Don’t forget to Wrap Happy,
So what have you been up to? Me? I’ve been writing and creating like a crazy person. (Don’t say it – you know I can hear you snicker from here, right?) I just released my newest tutorial – Back to the Beginning – Beginner Bangle Bracelet. I’ve spent a year writing this one, on and off – re-writing it – editing it….. It’s been a labor of love and a nightmare at the same time.
This tutorial was written for the absolute beginning wire worker. It’s a simplified version of my Swarovski Crystal Bracelet tutorial, but by no means a lesser pattern. This bracelet pattern has evolved over the course of many years teaching students how to wire wrap for the very first time, and has paved the way for my Crystal Hoop Earrings, the Marcella Ring, and many more designs. At the back of the tutorial is tons of information on tools (with photos), wire, suppliers, and all the basic information to get you started. Almost as good as having me right there with you!
In between writing, I have taken small breaks to answer ideas that pop into my head – The Fancy Swarovski Crystal Bracelet – the Double Marcella Crystal Ring, and the Clasp Ring for arthritis sufferers – and tons of Fanciful Flowers you haven’t seen yet….. tease 🙂
So I guess enough chattin’ up for one day, and time for me to get back to work – Next up in tutorials…… Fanciful Flowers Earrings and more 🙂
Thanks for stopping by – See you next time – Don’t forget to Wrap Happy,
Interested in knitting?, crocheting?, felting?, sewing?, jewelry?, quilting?, paper crafts?, embroidery? Craftsy has it all!!!
And if that’s not yummy enough, they recently added Patterns to their wonderful site. They already have thousands of patterns from Independent Designers, and more are added everyday. …….. Wait there’s more 😀 – all of the patterns offered for sale, are available for immediate/instant download – talk about instant gratification!! 😀 And if you’re one of the Designer’s with your patterns on Craftsy for sale, it gets even better, because Craftsy sells for you absolutely FREE!!! No more forking over, up to 50% of your hard work and income to someone else!!!
You gotta check it out – you’ll love it as much as I do!!! All of my work is there :)) check it out….. All of my upcoming tutorials will show up there first too! 😀
Okay – think I have the bugs worked out, so I don’t annoy every one :)) If you haven’t already you have to try Posterous!!! Simply awesome dude ;))
There never seems to be enough hours in the day – have been super busy over the summer. I need to get back into a regular routine – blog posts included – so how about a “get to know me’ post to start things back up? 🙂
HandmadeArtistsShop recently featured me on their website – Artists are send a thorough questionnaire, and Kimberly did an awesome job sorting out my blabberings – check it out if you get a chance, and I’m always happy to hear what you think. Featured Artist BobbiWired
Thanks for stopping by~
“The goal isn’t to live forever, the goal is to create something that will.” ~Chuck Palahniuk
So today was a really cool day. I made a trip to my PO box, expecting the regular bills and various sales trash that still plague the earth – and was very pleasantly surprised to find 2 letters from the Library of Congress. You see, almost 8 months ago, I started submitting my jewelry tutorials to the US Copyright Office for registration. At first, I checked my PO at least once a week, sometimes 2 or 3 times, looking for these prized letters. Silly me thought it would only be a matter of a couple weeks, and all my registrations would be sent. Nope, sorry – it’s not quite that easy. Well the registration part is – it’s the “wait for them to be researched, registered and returned” that’s the hard part, especially when patience isn’t your strong-suit.
Now, I know what some of you are thinking – “My tutorials are copyrighted as soon as I create them”, and/or “I put a notice at the end, that says they are my copyrighted works, so I don’t have to register”. Well you’re sort of right. Yes, you have a copyright on your work, as soon as it’s created and/or published; yes your notice at the end, does emphasize that fact a bit more. But, NO, you are not fully protected. It’s still incredibly easy for some nit to come along, and try and say, “no, that’s my work”, and without a Certificate of Registration, you’re a bit hard-pressed to defend against it. Now that same nit can still whine after you get your certificate, but then it is the nit who will be hard-pressed to get anywhere. The other major point, is if you need to file suit against someone for violating your rights, you HAVE TO have that registration before you can take them to court.
No, I’m not planning on taking anyone to court, but I, like every other artist out there, needed to protect myself against the whining nits. The copyright Office takes the time they do, because they do a thorough and exhaustive search, to see if your submission is already out there, and belonging to anyone else. When they send you your certificate, they don’t do it lightly. It’s basically the US Copyright Office standing on your side, saying, “Absolutely, Yes that’s your work”! One extra perk – Your work is also submitted to the Library of Congress as a permanent record! How cool is that?
Now you’d like a little help doing the same for your own tutorials? Well, I’m not an expert, but after 14 submissions, I’m on my way – so here’s some pointers and info to help you through it.
First you need to visit http://www.copyright.gov/ . There are tons of links and tutorials to answer just about any question you could ever have on copyrights. Then click on the eCO login
, read the privacy and security notice, then click on the link for new users towards the lower left side of the page under the login space. Be as complete as possible when you fill in your personal information. it will come in very handy later when you actually start a submission (registering a claim). The submission process has a great feature called “add me” wherever applicable, that inputs all your relevant personal information for you so you are not constantly retyping info.
The biggest hurdle is deciding what type of work you are submitting. For 99% of you, that will be a “Literary Work” in the drop down menu for type. Later in the submission you will have the opportunity to input exactly what all you think is included, ie photos, text, art, instruction, etc. There is a tutorial available at every step of the process if you get hung up. You can save the submission at any point, and come back to it later – very handy. You can work on your submissions as long as you like, there are no time limits set, when you start. It’s only when you send them money, and submit the tutorial does any of it become carved in stone, so take all the time you need.
I found it very handy to fill in every submission, all the way to the payment stage, and then “save for later”. Then whenever I was ready to pay for one, I just clicked on “working cases” in my profile, did one last quick check, and clicked “add to cart”. It’s only $35.00 per submission, and you can upload a pdf (make sure it is secured), directly after payment. You can send the tutorial by snail mail, but you can’t do both. If you send your pdf file, make sure you disable your pop-up blocker for this site first.
It doesn’t take long at all to get the hang of it. You have “working cases” – claims that are started but not paid for; “open cases” – claims that are paid for and submitted, but haven’t been registered by the CO yet; and “closed cases”. Those that have been registered and you have been sent certificates for. You can review any “case” at any time from your personal page after login, and your closed cases from the “my applications” link, also on your personal page.
I hope you take the time to at visit the US copyright Office website. The information is priceless. Other valuable information on the subject can also be found at http://www.sarahfeingold.com/
Comments and questions are always welcome – I’m not a lawyer, but I’ll try to answer you as best I can. If you get really hung-up, and you truly think you need a lawyer, make sure they are fluent in “Copyright Law”, not just patents, and trademarks – different animals all together.
Thanks for listening….
These wonderful hoop earrings evolved from my Swarovski Crystal Bracelet design. They can be made as big or as tiny as you like – I’ve “shrunk” them down small enough for a nose ring and of course they started as a bracelet :). This is a high-level beginner to intermediate project. The project is not complicated, but does assume you are familiar with; basic wire handling skills, such as cleaning, straightening wire, turning a basic loop, and completing a basic binding wrap.
The tutorial is available in both my Etsy Shop and on Craftsy. I hope you get a chance to check it out – while you’re there check out other fun designs you may have missed like the Knot a Ring, and Cuffs and Vines Earrings.
A friend on another forum really liked how tiny these hoops were getting, and it put the thought in my head, that maybe they would work as nose rings too. Soooooo here they are. Shae had gladly volunteered to be my guinea pig to see if they are comfortable to wear and fasten. I’ll keep ya posted 🙂
“If at first you don’t succeed, do it like your Mother told you to.” ~Unknown
Going back to the very beginning, bangle style bracelets were the very first thing I ever learned to wrap more than 20 years ago; what actually started my addiction to wire.
At the time, I was heavy into leather work and Native American style jewelry. I made leather and bone jewelry; custom saddlebags for motorcycles; and yes leather whips upon request. The tooling and sewing were taking an awful toll on my hands, and I needed a new creative outlet. A very dear friend, who owned the bead shop I haunted at the time, suggested wire wrapping. My hands were so bad, I told her, I didn’t think I could do it. I was seriously drawn to it, but it was several months after her initial suggestion, that I decided to give it a try.
She (Millie), sat down with me one night after the shop had closed, and showed me how to make the basic bangle. I still have the very first one here somewhere in my stash. The bracelets above were the next ones I made on my own (the Labradorite on the left was second – the Cloisonne’ on the right my third). The Scarab bracelet in the center was the first attempt at branching out beyond the basics. I was hooked!!! The wire was not near as hard on my hands as I thought it would be – I doubt I would have cared or stopped if it was – I was in love! The Cloisonne bracelet by the way, my Mother snagged as soon as she saw it – she was my biggest fan and snagged most all my “firsts” of any design :)).
Those first few months I couldn’t make enough of them, and after wearing one to work, everyone seemed to want one. I was averaging 10 to 15 bracelets a week, just for the people in the office where I worked.
The only drawback, was the way Millie had taught me to construct them was extremely difficult. Planning took soooo mmuch time, to get the right number of beads, and the wire just right to get the bracelet length right. Those of you who have my Swarovski Bracelet Tutorial, know I don’t construct them that way anymore. The modifications didn’t happen overnight – I experimented with many, many different construction techniques before I settled on the one I currently teach. Please don’t get the wrong idea – there is nothing wrong with the traditional way to make them, I just thought there had to be a better, prettier, and definitely easier way. Sadly Millie has long since passed away – I would have loved to show her how the basic bangle had evolved.
Though I’m definitely a “ring girl”, the bracelet is still one of my favorites to teach. The way I teach the construction now, it’s almost impossible to get the length wrong, and if you do, easy peazy to fix it.
I even experimented with tension setting a faceted stone in this style. Definitely one of the pieces I ran across that I’ll be revisiting…..
Well I’ve bent your ear enough for today, so I’m off to get some “chores” done LOL, and hopefully get some wrap time in!
Thanks for stopping by – Take care and…..