20% to 30% off Select Finished Jewelry, Tutorials & Tutorial Bundles, Gems, and Crystals in Settings.
Just a Small Sampling of the goodies on Sale
Super Summer Flash Sale Only on https://My-Wired-Imagination.com
For a limited time ONLY $75.00
Learn How to Wire Wrap Rings, Pendants, Bracelets, and Earrings, plus Tons of Tips, Tricks and Techniques.
ALL 27 of my Jewelry Tutorials – more than 48 patterns and/or variations total – enough to satisfy even the most hardcore jewelry junkie. 🙂
Full price for all these tutorials purchased separately is $238.50.
#mywiredimagination #handmadeisbetter #wirework #wirewrap #diyjewelry #diyjewelrymaking #wirewraptutorial #wirewrappedjewelry
I’m so very thrilled and blessed to have my wire wrapped version of the Princess Diana/ Princess Kate Engagement Ring featured in the October/November 2016 issue of Step by Step Wire Jewelry Magazine!! AND it made the cover too – woo hoo!! Denise Peck, chief editor for the magazine, also wrote a truly lovely intro for it.
There are a few ‘typos’ in the issue, that will be corrected in the digital version, but sadly it’s too expensive to correct and reprint the newsstand version. One of the most important ‘boo boos’ (aside from spelling my name wrong on the cover) is they listed my Etsy shop, MyWiredImagination.ety.com as having the wire for the project – um…. no! The resources should’ve read: Wire and Tools from RioGrande.com , Crystals and settings from MyWiredImagination.Etsy.com, and crystal beads from EurekaCrystalBeads.com
All in all, I’m really thrilled with how it turned out!! Look for the issue on newsstands starting Sept 15th!
Good Morning my pretties 😀 Well here’s a twist – no one correctly guessed the ring size for the ring posted Jan 23, AND Cindy never contacted me on the ring posted Jan 18 – guess she didn’t subscribe to my blog to get notified 🙁
Soooo – Beverly Hoagland had the next closest guesses (without going over) on both rings, and I decided to let her choose which one she wanted. She chose the Montana and Sterling. Congratulations Beverly!!
That leaves the Vintage Glass Opal and Gold Filled ring. After Beverly, Sarah G had the next closet guess without going over – Congratulations Sarah!! The ring is a size 5 ¼ btw. Contact me here on my blog, or on Facebook with a mailing address so I can get your new ring to you.
On to the next ring 😀
The next ring with the most comments and “likes” on Facebook is this one in 14k GF wire and Vintage Swarovski Crystals in Peridot and Tourmaline.
Some of the rings that will end up in this game, may have minor flaws that prevent me from selling them (I am my own worst critic) – this ring however doesn’t have any flaws; I just thought I’d add it to the game. 😀 It is a slight variation on my Marcella Crystal Ring 1 tutorial.
Sooooo – post your guess for the size here in the comments, and the first one to correctly guess will win the ring – FREE. Guesses are only valid here on my blog – 1 guess per person – and if you win a ring, please be fair, and don’t try to win another one for a month. There will be plenty of rings in the future, I promise. 😀
Have fun with game – don’t forget to subscribe to my blog, so you get notified as soon as I post a winner (it may be you) and a new ring.
I am a die-hard Pack Rat – It’s awful – I don’t let go of anything that has the remote possibility of being useful. Note I said ‘pack rat’ not ‘hoarder’ – there’s a difference – garbage is garbage, but there is lots of useful “stuff” in my collection. This is one such piece of “stuff”.
I have been playing around with a micro-torch lately, and needed a flame proof work surface – not good to set your bench on fire. I nearly fell off my chair with kiddyness when I remembered this old kiln in my garage. It was a ‘gift’ almost 30 years ago, and I’ve hung on to it all this time, despite not having any idea how to use it – it has no power cord, but looks like it should have one. I’ve never been able to find any useful info on it despite having the brand name “Nova” and the model and serial number. There are 4 pieces to it; 2 lined cylinders, and the top and bottom which I use to torch on.
Soooooo, what’s in your garage? 😀
See ya again soon,
Good Morning my pretties 🙂 As promised I’m not waiting for Fridays to post a winner and the next ring. The size for the ring posted Jan 18, 2013 was 9 1/2 – the first person to correctly guess it was Cindy Peiper – Congratulations Cindy – (Don’t forget to contact me here or on Facebook with a mailing address so I can get your ring out to you).
The next ring with the most comments and “likes” on Facebook is this one in 14k GF wire and Vintage WG Pink Glass Opals. Some of the rings that will end up in this game, may have minor flaws that prevent me from selling them (I am my own worst critic) this ring however has no flaws, it was just an experiment with my Marcella Crystal Ring 2 tutorial, that wasn’t quite what I had in mind :D.
Sooooo – post your guess for the size here in the comments, and the first one to correctly guess will win the ring – FREE. Guesses are only valid here on my blog – 1 guess per person – and if you win a ring, please be fair, and don’t try to win another one for a month. There will be plenty of rings in the future, I promise :).
Have fun with game – don’t forget to subscribe to my blog, so you get notified as soon as I post a winner and a new ring.
Well It didn’t take long for folks to guess the first ring – Congratulations Bonnie !! – So on to the next one – Please see my earlier post Happy Holidays and Guess My Size for info and entry rules.
I am going to slow things down just a bit though or you’all will guess them faster than I can take pics and add them to the game. Since I started this on a Friday, winners and the next ring will be announced just on Fridays. Oooh how’s this for a title – Freebie Fridays? Works for me lol.
Good morning fellow jewelry junkies – are you having a good holidays? Mine have been okay, though I’ve been having to deal with some ugly personal issues, but that story is for another day, and not what I’m writing about today.
Some of you may have noticed the ring sale I have running in my Etsy Shop – now even though I’m saving for a good video camera to do video tutorials (Santa skipped my house), and taking advantage of my sale would be really cool, that’s not why I’m writing today either. 🙂
Aside from needing a video camera, I started the sale because I realized I’m buried in rings. You see when I make rings (and all jewelry in general) I don’t really make them with shop inventory in mind. To break it down, I’d say about 50% are made in developing new designs for tutorials; 20% I make for myself (though I really don’t need any more); and the other 30% I make just to see what I come up with.
While I was (am) photographing and listing pieces, I’ve run across quite a few, that for one reason or another I can’t “sell” them. To me they have some kind of ‘flaw’, and I would hate for someone to buy them and notice the flaw, though I am my own worst critic (I’m told), and the buyer probably wouldn’t see a flaw.
In any case, I can’t just throw them away – they are all made with good crystals or gems and Sterling Silver and/or 14K Gold Filled wire. Soooo, the reason I’m writing this post (you knew I’d get around to it sooner or later) is to have some fun with them.
Simply put – You guess the ring’s size, and I’ll send it to you – for FREE. Yes, you read that right – for FREE, the first person to guess the size of the current ring offered gets that ring, no strings attached. I’m only going to post one ring at a time – when someone wins it, I’ll post another one (I have about a half dozen or so right now, and I’m sure I’ll add more). If you’d like a sneak peek at some of the rings that will end up in this game, I will post them on my Facebook Page in the photo folder “Guess My Size” – note: the order of the photos is not the order they will show up here, hee hee.
You’re welcome to comment on the photos, but guesses posted on rings other than the current ring won’t count and will be deleted. I guess that would be a rule – there has to be rules right? Rule #2 – You have to subscribe to my blog – that’s to your benefit too, so you get notified the minute I post a new ring in the game 🙂 Rule #3 – You only get 2 guesses – one in a comment here, and one on the Facebook post – if you post more guesses in either place, I’ll just use your first ones. That’s enough rules right? Play nice so I don’t have to add anymore 🙂 For a third guess at the current ring offered, share this post on Facebook, and let me know in a comment here or on Facebook 🙂
The first ring up is Sterling Silver and a Vintage Swarovski Crystal that WAS the color ‘Seal’. The ring was in the tumbler for only 5 stinkin’ minutes, and all the color’s gone? See the ‘flaw’? 🙂 As a rule, short spins in the tumbler have no affect on the crystals, but not for this one I guess. I suppose I should be grateful to find that out now, but I paid an awful lot for those crystals to have the color come right out :(. Other than that it’s a great ring – have fun, and Guess My Size 😀
See ya soon – good luck,
Some of you may know my Mother passed away in 2005. August 1st was her birthday.
I had been wearing some of her charms just strung on a chain, and thought it time for something better. I played around making the charm holder pendant as a way to cheer myself up a bit. A friend suggested I should show people how to make it, since I wasn’t the only one (to wear charms strung on a chain). So here it is ~ I hope you like it.
7 to 12 in. (17.8 to 30.5cm) 16ga ½ hard round wire. (depending on the size of the pendant you want to make.) 2 or 3 – 6mm(or larger) jump rings.
|Cut and clean a 7 inch (17.8cm) piece of half hard round wire.With your round nose pliers grasp the wire 2 in. (5.1cm) from the end of the wire.|
|Cross the wires over the pliers, and spread them just far enough apart to create a loop.|
|Use your thumb to shape the left lobe of the heart.|
|Continue shaping the wire, until it looks something like this.|
|Hold on to the completed side of the heart, and use your thumb to shape the other lobe of the heart.|
|Slide 2 or 3 jump rings onto the shorter wire. These will act as the ‘bail’ for your pendant.|
|Use chain nose pliers to wrap the short wire around the long wire.|
|This is how your pendant should look at this point.|
|With your thumb, shape the long tail of wire into a curve.|
|With round nose pliers, grasp the wire roughly 1 inch below the wrapped wire, and bring it around the jaw of the pliers to create the bottom loop.|
|Create a hook in the end of the wire. This will be the “latch” for your charm holder.|
|Tada 🙂 Add some hammered texture and some charms and you’re good to go.|
|This is mine, though I think I might need to make a bigger one.|
Don’t forget to Wrap Happy,
Let me start by saying I LOVE working for myself. Granted the hours are very long – on average 12 to 16 hours a day, every day; no paid sick days, no paid vacation days, and the constant feeling I’m sooooo far behind. You might think I’m whining, but I’m not – okay maybe just a teensy bit, but I’ll try to keep it at a minimum.
I would love to have an assistant, but it’s just not in my budget – I hear you snickering – yes I have a budget. O.o So instead of an assistant, I’ve been on the hunt for some simple tools to help with the workload. I’ve found several that are so far really useful, and thought I’d share. 🙂 All of these are built on the Etsy API so they integrate with your Etsy flawlessly.
First up is Etsy Shoptimizer – It’s a free app that is a ‘report card’ of sorts to help you optimize your shop. It’s super simple to use and covers a ton of useful information and suggestions.
An oldy but a goody I use on a weekly basis is Craftoplolis also know as Etsy Shop Lovers. It can be a little slow to load if you have a ton of product in your shop, but it’s incredibly useful to see “hearts” , listing information, and batch edit your listings for everything but tags.
Which brings me to one of the newer tools I’ve tried; BETSI – Bulk/Batch Editing Tool. There are 2 versions; one at a $9.00 monthly subscription rate, and a free BETSI lite. I personally like the full version, and think the subscription rate is well worth it. BETSI Lite would work really well for newer shops with fewer listings, and little to no deactivated or expired listings. There are several other batch editing tools available; some I just didn’t care for and a couple I hated, but you can decide what works best for you.
The newest tool I found is something of a “Holy Grail” kind of app for any Etsy Seller with digital products. Instant Digital Download Delivery for your Etsy shop by CraftHub.me. It is built on the Etsy API but not yet on their apps list – it only just became live August 16th. It was super simple to set up, and you get 5 transactions for free to test drive it. “Transaction” is defined by total sale, not the number of files sold. 🙂 There are several payment plans to suit your needs, and you can upgrade as your sales grow. If you do a search on Etsy for instant downloads you’ll see a ton of listings, but if you read their descriptions you’ll see they’re confused on what instant is – “within 24 hours” is NOT instant. As far as I can tell there are currently only 4 shops that truly have Instant Download available – (one created her own coding) and the 3 shops using CraftHub – Me 😀, SwellandGrand printable invitations, and FancyDogStudio who is partnered with CraftHub. I’m sure this list will grow as word gets around.
There are tons of other tools for Etsy sellers and buyers available. If you haven’t ever clicked the little link in the lower left corner of Your Etsy – Resources you really should. I’m sure there is an app for just about everyone!!!
You could find the perfect assistant you’ve been searching for. 🙂
Thanks for stopping by – comments and questions are always welcome!
wrap happy ~ Bobbi
So what have you been up to? Me? I’ve been writing and creating like a crazy person. (Don’t say it – you know I can hear you snicker from here, right?) I just released my newest tutorial – Back to the Beginning – Beginner Bangle Bracelet. I’ve spent a year writing this one, on and off – re-writing it – editing it….. It’s been a labor of love and a nightmare at the same time.
This tutorial was written for the absolute beginning wire worker. It’s a simplified version of my Swarovski Crystal Bracelet tutorial, but by no means a lesser pattern. This bracelet pattern has evolved over the course of many years teaching students how to wire wrap for the very first time, and has paved the way for my Crystal Hoop Earrings, the Marcella Ring, and many more designs. At the back of the tutorial is tons of information on tools (with photos), wire, suppliers, and all the basic information to get you started. Almost as good as having me right there with you!
In between writing, I have taken small breaks to answer ideas that pop into my head – The Fancy Swarovski Crystal Bracelet – the Double Marcella Crystal Ring, and the Clasp Ring for arthritis sufferers – and tons of Fanciful Flowers you haven’t seen yet….. tease 🙂
So I guess enough chattin’ up for one day, and time for me to get back to work – Next up in tutorials…… Fanciful Flowers Earrings and more 🙂
Thanks for stopping by – See you next time – Don’t forget to Wrap Happy,
Interested in knitting?, crocheting?, felting?, sewing?, jewelry?, quilting?, paper crafts?, embroidery? Craftsy has it all!!!
And if that’s not yummy enough, they recently added Patterns to their wonderful site. They already have thousands of patterns from Independent Designers, and more are added everyday. …….. Wait there’s more 😀 – all of the patterns offered for sale, are available for immediate/instant download – talk about instant gratification!! 😀 And if you’re one of the Designer’s with your patterns on Craftsy for sale, it gets even better, because Craftsy sells for you absolutely FREE!!! No more forking over, up to 50% of your hard work and income to someone else!!!
You gotta check it out – you’ll love it as much as I do!!! All of my work is there :)) check it out….. All of my upcoming tutorials will show up there first too! 😀
Are you a fan of the Beading Gem Journal?? I was totally thrilled to be featured on Pearl’s blog this week – Thank you, thank you Pearl!!! There’s still time to enter to win a $50 Gift Certificate to MyWiredImagination (drawing ends this coming Monday 01/23/2012) – check out Pearl’s wonderful post at http://www.beadinggem.com/2012/01/mywiredimaginations-50-gift.html for details to enter –
Good luck and……
Many of you know I spend a good portion of my time in my local bead store. Being the resident wire junkie, has its perks, it also has its challenges. One of the challenges is, that I constantly get requests to create or re-create a manufactured finding. The request usually goes something like this….. “I really love blank, but it’s not blank enough. Can you make it for me bigger, bolder, smaller, in silver, in gold, fancier, simpler, blank. blank, or blank.”
That’s how the Faux Bow Angel came about – they needed bigger angel wings than are commercially available. So to make a long story short… here’s how to make wire “Angel Wings”. You could really make them any size you like, but for this we’re going to make them big – for a pendant size angel.
Materials needed for wings approximately 1 1/2 by 3/4 inches – 10 to 12 inches (25.4 to 30.5cm) 18ga Artistic wire – I like the Non-Tarnish Silver – but you can use any color you like. You can also use copper, sterling, fine silver or gold filled wire, (soft is better.)
Materials for a finished Angel : 1 lg briolette – at least 10 x 20mm drilled top to bottom; 1 bead cone in proportion to the briolette; 1-10mm round bead; 1 4 inch head pin; 1 or 2 6 to 8mm crystal rondell
Tools: flush cutters; chain nose pliers; round nose pliers; extra large round nose ( approx 15mm dia. or larger)
Now if you paid attention to the title, you might recognize the “Faux Bow” – the angels wings are loosely based on that free tutorial. If you don’t already have a copy – head over to my “Free Tutorials” page to download a copy.
After cutting your piece of wire, straighten it out with your fingers and use round nose pliers to form a small coil at the center.
Hold the wire so the coil hole is straight up and down – not facing you. Place your extra large round nose pliers on the wire to the right of the coil, roughly 1/2 inch from the coil as shown.
Bring the right wire over the pliers, forming a teardrop. The wire should cross behind the coil.
Your wings should look something like these at this point.
Hold the left ‘wing’ and the wire just under it (the right wire you angled to the left) tightly so they don’t move. If you don’t have the finger strength, use a pair of wide nylon jaw pliers. If you let the wires slip on this next part, your wings will shrink and be uneven.
Use the wire angled to the right, to wrap tightly around the right wing one time. Leave the wire facing down.
Turn the wings around, so you can get a good grip on the other wing. Bring the free end of the wire towards you, around the wing, and ending in the same direction it was in to start.
I curled the ends of the wires the same as in the Faux Bow, but you could just cut them short, and tuck them in towards the Angel.
Put your Angel together by threading the headpin from the bottom in this order – briolette, bead cone, crystal rondell, wings, round bead, and another rondell for her halo.
Form a double loop at the top for a bail, and you’re all set – maybe. 🙂
To give the wings a little more “wingly” shape – At the middle of the outside of the wing, use flat nose pliers – grip the wire, and turn it in towards the center just a bit.
I hope you enjoyed a quick peek at Faux Bow Angel Wings. Look for the full tutorial on the Free Tutorials page soon.