New Tutorial Release – Eye of the Hurricane, Wire Wrapped Pendant
LAST Week for my summer sale!!! Sale ends Aug 31, 2015 midnight est
There is 15 pages with 74 full color, clear, crisp detailed photographs, which can be enlarged to more than 500% without any loss of detail or clarity, and 26 steps covering 3 variations, for both the visual and instructional learner. Almost as good as having me sitting right there with you. Measurements are given in both inches and metric.
This is a mid-level beginner tutorial – You should at least be familiar with basic jewelry tools, terminology, and simple skills such as creating a basic loop. Direct hyper links for tools and materials are provided.
Materials suggested for one basic pair of earrings (additional materials listed later in this tutorial):
One pair crystals or gems in OPEN BACK sew on settings aka Montees – size and shape is your choice. Crystals in Settings
20ga round wire, half hard.
One pair earring backs, aka ear nuts or butterfly backs.
Flat nose and/or chain nose pliers, round nose pliers.
Wire rounder aka cup bur on a stick, or file to smooth wire ends.
Ruler with millimeters.
Bail pliers, Pin Vise
20 or 21ga square ½ hard wire, standard ear wires
Thanks for stopping by – see ya soon….
Happy Full Moon Monday 🙂
Just a quick note to let you know there is still a few days left in my SUPER SHINY Sale – 25% off my ENTIRE Etsy Shop MyWiredImagination – ALL Finished jewelry, Tutorials, Jewelry Supplies, Gems and Crystals 25% off – even already discounted tutorial packages 😀 ♥♥♥ Sale ends Thursday, February 28, 2013.♥♥♥
Shop happy, and have a great week,
Some of you may know my Mother passed away in 2005. August 1st was her birthday.
I had been wearing some of her charms just strung on a chain, and thought it time for something better. I played around making the charm holder pendant as a way to cheer myself up a bit. A friend suggested I should show people how to make it, since I wasn’t the only one (to wear charms strung on a chain). So here it is ~ I hope you like it.
7 to 12 in. (17.8 to 30.5cm) 16ga ½ hard round wire. (depending on the size of the pendant you want to make.) 2 or 3 – 6mm(or larger) jump rings.
|Cut and clean a 7 inch (17.8cm) piece of half hard round wire.With your round nose pliers grasp the wire 2 in. (5.1cm) from the end of the wire.|
|Cross the wires over the pliers, and spread them just far enough apart to create a loop.|
|Use your thumb to shape the left lobe of the heart.|
|Continue shaping the wire, until it looks something like this.|
|Hold on to the completed side of the heart, and use your thumb to shape the other lobe of the heart.|
|Slide 2 or 3 jump rings onto the shorter wire. These will act as the ‘bail’ for your pendant.|
|Use chain nose pliers to wrap the short wire around the long wire.|
|This is how your pendant should look at this point.|
|With your thumb, shape the long tail of wire into a curve.|
|With round nose pliers, grasp the wire roughly 1 inch below the wrapped wire, and bring it around the jaw of the pliers to create the bottom loop.|
|Create a hook in the end of the wire. This will be the “latch” for your charm holder.|
|Tada 🙂 Add some hammered texture and some charms and you’re good to go.|
|This is mine, though I think I might need to make a bigger one.|
Don’t forget to Wrap Happy,
Many of you know I spend a good portion of my time in my local bead store. Being the resident wire junkie, has its perks, it also has its challenges. One of the challenges is, that I constantly get requests to create or re-create a manufactured finding. The request usually goes something like this….. “I really love blank, but it’s not blank enough. Can you make it for me bigger, bolder, smaller, in silver, in gold, fancier, simpler, blank. blank, or blank.”
That’s how the Faux Bow Angel came about – they needed bigger angel wings than are commercially available. So to make a long story short… here’s how to make wire “Angel Wings”. You could really make them any size you like, but for this we’re going to make them big – for a pendant size angel.
Materials needed for wings approximately 1 1/2 by 3/4 inches – 10 to 12 inches (25.4 to 30.5cm) 18ga Artistic wire – I like the Non-Tarnish Silver – but you can use any color you like. You can also use copper, sterling, fine silver or gold filled wire, (soft is better.)
Materials for a finished Angel : 1 lg briolette – at least 10 x 20mm drilled top to bottom; 1 bead cone in proportion to the briolette; 1-10mm round bead; 1 4 inch head pin; 1 or 2 6 to 8mm crystal rondell
Tools: flush cutters; chain nose pliers; round nose pliers; extra large round nose ( approx 15mm dia. or larger)
Now if you paid attention to the title, you might recognize the “Faux Bow” – the angels wings are loosely based on that free tutorial. If you don’t already have a copy – head over to my “Free Tutorials” page to download a copy.
After cutting your piece of wire, straighten it out with your fingers and use round nose pliers to form a small coil at the center.
Hold the wire so the coil hole is straight up and down – not facing you. Place your extra large round nose pliers on the wire to the right of the coil, roughly 1/2 inch from the coil as shown.
Bring the right wire over the pliers, forming a teardrop. The wire should cross behind the coil.
Your wings should look something like these at this point.
Hold the left ‘wing’ and the wire just under it (the right wire you angled to the left) tightly so they don’t move. If you don’t have the finger strength, use a pair of wide nylon jaw pliers. If you let the wires slip on this next part, your wings will shrink and be uneven.
Use the wire angled to the right, to wrap tightly around the right wing one time. Leave the wire facing down.
Turn the wings around, so you can get a good grip on the other wing. Bring the free end of the wire towards you, around the wing, and ending in the same direction it was in to start.
I curled the ends of the wires the same as in the Faux Bow, but you could just cut them short, and tuck them in towards the Angel.
Put your Angel together by threading the headpin from the bottom in this order – briolette, bead cone, crystal rondell, wings, round bead, and another rondell for her halo.
Form a double loop at the top for a bail, and you’re all set – maybe. 🙂
To give the wings a little more “wingly” shape – At the middle of the outside of the wing, use flat nose pliers – grip the wire, and turn it in towards the center just a bit.
I hope you enjoyed a quick peek at Faux Bow Angel Wings. Look for the full tutorial on the Free Tutorials page soon.